Skip to main content
How to set Auto-approve in an enrollment packet

These are the steps necessary to auto-approve one or multiple sections within a packet

Updated over a week ago

To set any single or multiple sections to auto-approve, please follow the below steps.

Please note: Submissions entered on a daily basis will be auto-approved nightly.

  1. Navigate to the Froms>Packets tab

  2. Select the enrollment packet to be adjusted

  3. Open the packet section to be set to auto-approve

  4. Toggle the auto-approve submissions button to Blue

  5. Repeat on any additional section(s) as necessary

Did this answer your question?